Specifications

Appendix E Parameters and Screens IPmux-4 Installation and Operation Manual
E-6 General Configuration
Authentication/Community
Configure the Authentication/Community parameters when the IPmux-4 inband
management capability is used. The parameters define the community names used
by SNMP to write, read or accept traps from IPmux-4.
The Community window is displayed in Figure E-8.
The default value for all three operations is public.
COMMUNITY
1. Authentication Failure Trap On
2. Trap public
3. Read public
4. Write public
ESC. Exit
Select item from the menu: _
Figure E-8. Community Window
Table E-1. Community Parameters
Key Parameter Possible Values Remarks
1 Authentication-
Failure Trap
On
Off
An authentication-failure trap is
generated when a system manager
attempts to set a parameter within
IPmux-4 with an incorrect community
value
2 Trap community A name of up to 10
alphanumeric characters
The entry is case-sensitive
3 Read Community A name of up to 10
alphanumeric characters
The entry is case-sensitive
4 Write Community A name of up to 10
alphanumeric characters
The entry is case-sensitive
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
3. Management
Configuration
↓
1. Authentication/
Community
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com