Specifications

IPmux-4 Installation and Operation Manual Appendix E Parameters and Screens
General Configuration E-5
E.2 General Configuration
Host IP
➤
To configure the Host IP address and IP Mask:
1. Press 1 and enter the Host IP.
2. Press 2 and enter IP Mask.
This combines the IP packet (source IP Add). This Host IP is also necessary for the
inband management capability of IPmux-4.
Frames will not leave the device until IP and Mask addresses are defined.
HOST IP
1. IP Address 192.168.217.12
2. IP Mask 255. 255. 255. 0
ESC. Exit D. Delete
Select item from the menu:_
Figure E-6. User Port Configuration Menu
To change the Host IP configuration, you must first delete all connections defined in
the Bundle Connection Configuration, the Default Gateway and any defined
managers, and then delete the Current Host Configuration and then reconfigure
both.
Default Gateway
Default gateway defines the gateway to which management frames will be sent
(when the manager is not in the host subnet).
➤
To configure the default gateway:
• Type 1 and then type in the IP address of the default gateway.
DEFAULT GATEWAY
1. Gateway IP 0.0.0.0
ESC. Exit
Select item from the menu.
Figure E-7. Default Gateway Menu
Note
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
1. Host IP
Note
Main Menu
↓
2. Configuration
↓
1. General
Configuration
↓
2. Default
Gateway
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com