Specifications

IPmux-4 Installation and Operation Manual Appendix E Parameters and Screens
Viewing the IPmux-4 System E-3
Self-Test Results
A typical Self-Test Results window for an IPmux-4 is shown in the following figure.
If a problem is encountered refer to Chapter 4
➤
For details:
• Type M. If a problem is encountered refer to Chapter 4.
SELF TEST RESULTS
USER PORT: Framer Test -- Ok
USER PORT: SAR Test -- Ok
LAN RAM test -- Ok
LAN card code download -- Ok
Ethernet test -- Ok
USER PORT: RT Registers -- Ok
USER PORT: RT RAM Size -- 512 KB
USER PORT: RT Ext RAM -- Ok
MAIN BOARD: RT Registers -- Ok
MAIN BOARD: RT RAM Size -- 512 KB
MAIN BOARD: RT Ext RAM -- Ok
Self test ended -- successfully
Press ESC to exit
Figure E-2. Last Self-Test Results Window
Reset
➤
To reset the IPmux-1/1E configuration:
1. Type 3 (Reset) in the System Menu.
A confirmation message appears.
2. Press Y to confirm System Reset for IPmux-1/1E.
Are you sure you want a total reset??? (Y/N)
Figure E-3. Reset Confirmation Message
Main Menu
↓
1. System
↓
2. Self-Test
Results
Main Menu
↓
1. System
Menu
↓
3. Reset
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com