Specifications

Chapter 2 Installation IPmux-4 Installation and Operation Manual
2-2 Equipment Needed
The ambient operating temperature of IPmux-4 is 0
o
to 50
o
C (32
o
F to 122
o
F), at a
relative humidity of up to 90%, non-condensing.
2.3 Package Contents
The IPmux-4 package contains the following items:
• IPmux-4 unit
• Power cord
• CBL-RJ-45/DB-9/NULL cross-cable that connects the IPmux-4 control port and
an ASCII terminal (DTE) for local management.
• RM-11 kit containing hardware for mounting IPmux-4 in a 19-in rack
(optionally supplied)).
Power Cable
IPmux-4 comes equipped with the power cord connected to PS1 on the Rear
Panel. If the unit is equipped with a redundant power supply, IPmux-4 is
equipped with an additional power cord.
2.4 Equipment Needed
• Hand Tools and Kits
IPmux-4 needs no special tools for installation. A screwdriver is necessary
when mounting IPmux-4 in a 19-in rack.
• Control Cable
IPmux-4 is provided with one null cable:.
The null cable (CBL-RJ-45/DB-9/NULL) is used to connect IPmux-4 (DTE) to a
terminal (DTE). Terminals are usually equipped with a male connector DB-9
or DB-25; therefore the null cable should have a female connector.
A straight cable can be defined to connect IPmux-4 (DTE) to a modem (DCE).
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com