Specifications

IPmux-4 Installation and Operation Manual Index
I-3
Reset, E-3
Restore Time, E-20
RFC, B-3
RM-11 kit, 2-2
Round Trip Delay, 1-15
Rx Sensitivity, E-16
—S—
screens. See menus
Sequence Errors, E-31
Server IP Address, D-2
SES, E-27
setRequest, B-2, B-4
Signaling Mode, E-17, E-20
Simple Network Management Protocol. See SNMP
SNMP, B-1, E-6
Agent, B-3, B-4
Community, B-4
Environment, B-1
Operations, B-1
Principles, B-1
Software
Download, A-1
standards, 1-4
statistics, E-25
superuser, D-2
supply voltage, 2-1
switches, 2-4, 3-1
—T—
T1, 1-3
TDM Bytes, E-14
technical specifications, 1-16
Telnet, C-1
starting a session, C-1
System Security, C-2
terminal, E-9
terminal-emulation, 3-3
testing, 1-7
TFTP, E-12
downloading procedure, D-1
tftpRetryTimeOut, D-2
tftpTotalOut, D-2
time, E-10
timeout, E-9, E-12
timeslots, 1-6, E-22
timing, 1-4
adaptive, 1-4
external clock, 1-4
internal clock, 1-4
loopback, 1-4
network, 1-8
single clock source, 1-9
timing modes
adaptive, 1-7
external clock, 1-8
internal clock, 1-8
loopback, 1-7
ToS, 1-4
Transmit Clock Source, E-16
trap, B-2
alarm, E-7
system, E-7
—U—
UAS, E-27
UDP, 1-11, B-1
UDP payload, 1-10
unframed, 1-3, 1-7, 1-15, 1-3, 1-7, 1-15
upload, E-11, E-12
User Datagram Protocol, B-1
—V—
VLAN, 1-4, 1-11, 1-4, 1-11, E-14
—X—
XMODEM, E-11
Order from: Cutter Networks
Ph:727-398-5252/Fax:[phone]
www.bestdatasource.com