Specifications
Chapter 4 Configuration RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
4-30 Configuring for Operation RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
RICi-4E1/T1, RICi-8E1/T1
Configuration > Applications > OAM > End-To-End > Flows > MAID
Flow ID ... (1)
1. MD ID[1 – 8] ... (1)
MD Format > (None)
MD Name (None)
2. MA Format > (String)
3. MA Name ... ()
ESC-Previous menu; !-Main menu; &-Exit
Figure
4-32. MAID Menu
Table
4-14. MAID Parameters
Parameter Possible Values Remarks
Flow ID Displays the Flow ID.
MD ID 1 - 8
Select the ID of the desired maintenance domain (MD ID)
MD Format Displays the selected maintenance domain’s format
(MD Format)
MD Name Displays the name assigned to the selected maintenance
domain (MD Name).
MA Format String
Primary Vlan
Unsigned Int 16
ICC
Select the maintenance association’s format (MA Format).
Default: String
MA Name Assign a name to the maintenance association (MA Name)
Default:
• DEFAULT if MA Format is String or ICC format
• 0 if MA Format is Unsigned Int 16
• SP VLAN configured earlier if MA Format is Primary VLAN
³ To configure the maintenance entity group’s end point (MEP)
1. Select MEP.
The MEP menu appears as illustrated in
Figure
4-33
.
2. Configure the MEP parameters as specified in
Table
4-15
.
3. Select Save.