Specifications
RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Operation 4-29
3. Save your changes.
RICi-4E1/T1, RICi-8E1/T1
Configuration > Applications > OAM > End-To-End > Flows
Flow[1 – 8] ... (1)
1. Flow Name ... (Put your String here)
2. SP VLAN[1 – 4094] ... (1)
3. Protocol Type (Standard)
4. MAID
5. MEP
Please select item <1 to 1>
A-Add New Flow ;
ESC-Previous menu; !-Main menu; &-Exit
Figure
4-31. Flows Menu, Adding Flow
Table
4-13. OAM Flow Parameters
Parameter Possible Values Remarks
Flow 1 – 8 Flow ID
Flow Name
Assign a name to the relevant flow.
SP VLAN 1 – 4094 Specify the VLAN used to send the OAM for the specified Maintenance
Entity Group (MEP).
Protocol Type Proprietary
Standard
Proprietary refers to RAD’s proprietary OAM protocol. If you choose
Proprietary, you only have to configure MEP.
Default: Standard
MAID Refers to the Maintenance Association ID. This parameter only appears
if Protocol Type is set to Standard.
MEP Refers to the Maintenance Entity Group End Point.
³ To configure the maintenance association’s ID (MAID):
1. Select MAID.
The MAID menu appears as illustrated in
Figure
4-32
.
2. Configure the MAID parameters as specified in
Table
4-14
.
3. Save your changes.