Specifications

Chapter 4 Configuration RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
4-28 Configuring for Operation RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
Table 4-12. MD Names Menu
Parameter Possible Values Remarks
MD ID The maintenance domain’s ID
MD Format None
String
DNS Like
MAC + UINT
Indicates maintenance group entity ID’s (MEG ID)
domain name format.
None – No name defined
String – Alphanumeric value
DNS Like –DNS format
MAC + UINT – MAC and UINT format.
Default: String
MD Name Indicates maintenance group entity ID’s (MEG ID)
domain name. One MD name (None) remains by
default.
Default:
• None if MD Format is String or DNS Like format
• 0000000000000000 if MD Format is MAC + UINT
³ To delete an MD:
• To delete an MD, in the OAM MD Names menu type d.
Configuring OAM Flows
An OAM flow is an association of devices used for OAM message exchange. The
RICi-4E1/T1, RICi-8E1/T1 units support up to eight flows.
³ To view existing OAM flows:
1. From the OAM End-To-End (Configuration > Applications > OAM > End-To-
End) menu, select Flows.
The OAM Flow menu appears.
2. To view configured flows, type f to scroll forward or b to scroll backward
through the list.
RICi-4E1/T1, RICi-8E1/T1
Configuration > Applications > OAM > End-To-End > Flows
Flow[1 – 8] ... (0)
A-Add New Flow ; F-Forward ; B-Backward ; D-Delete
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-30. Flows Menu
³ To add a flow:
1. To add a flow, type A and enter the desired flow ID.
The new flow appears as illustrated in
Figure 4-31 .
2. Configure the flow parameters as specified in
Table 4-13.