Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Operation 4-25
³ To assign priorities to traffic queues, for DSCP:
1. Navigate to Main Menu > Configuration > Applications > QoS > Priority
Classification. Following the previous procedure, select DSCP as the desired
traffic classification method.
2. Navigate to Main Menu > Configuration > Applications > QoS > Priority
Mapping.
The Priority Mapping (DSCP) menu appears as illustrated in
Figure 4-25 .
The menu lists only those values that have been changed from their
default values.
RICi-4E1/T1, RICi-8E1/T1
Configuration > Applications > QoS > Priority Mapping(DSCP)
1. Tag Value 0 > (Traffic Class 2)
2. Tag Value 63 > (Traffic Class 2)
a – add
ESC-prev menu; !-main menu; &-exit;
Figure 4-25. Priority Mapping Menu (DSCP)
3. From the Priority Mapping menu, select the desired tag value (0 – 63) and
enter the assigned traffic queue number (0 – 3). Each traffic queue can be
assigned to more than one tag. To add a new entry, select a (add) and enter
the tag value and traffic queue number.
To remove an entry, assign Traffic Class 0 to it.
4. Repeat for all tag values you wish to change.
5. Select Save.
³ To assign priorities to traffic queues per bridge port:
1. Navigate to Main Menu > Configuration > Applications > QoS > Priority
Classification. Following the above procedure, select Per Port as the desired
traffic classification method.
2. Navigate to Main Menu > Configuration > Applications > QoS > Priority
Mapping.
The Priority Mapping (Per Port) menu appears as illustrated in
Figure 4-26 .
3. From the Priority Mapping menu, select the desired bridge port.
4. Select Traffic Class and enter the traffic queue number (0 – 3) to be assigned
to the bridge port. Each traffic queue can be assigned to more than one port.
5. Repeat steps 1 – 4 for all active bridge ports.
6. Select Save.