Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Operation 4-23
The bridge has six bridge ports (BP). BP1 is dedicated to the IP Host. BP2 through
BP6 can be bound to Fast-Ethernet ports 1–4 or to the MLPPP bundle.
Note that PPP/MLPPP does not synchronize unless a bridge port has been bound
to the MLPPP bundle.
Configuring VLAN Membership
³ To configure VLAN Membership:
1. Navigate to Main Menu > Configuration > Applications > Bridge > VLAN
Membership.
The VLAN Membership menu appears as illustrated in
Figure 4-22 .
2. Select VLAN ID, and type the VLAN ID you wish to configure.
3. Select Egress Tagged Ports. Packets carrying this VLAN tag will be transmitted
‘untouched’ (i.e. the VLAN tag remains attached).
4. Select Egress Untagged Ports. This VLAN tag will be removed from the
packets before they are transmitted.
5. Select Save to finish VLAN Membership configuration.
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Configuration > Applications > Bridge > VLAN
Membership
1. VLAN ID (1)
2. Egress Tagged Ports > (1, 2)
3. Egress Untagged Ports > (6)
4. Save >
f-Forward ; b-Backward; g-Go To ; d-Delete
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-22. VLAN Membership Menu
Configuring Quality of Service (QoS)
Three methods of traffic classification are supported:
• 802.1 priority mapping
• DSCP priority mapping, using tag values
• Priority mapping per Ethernet port.
The classification method is chosen using the Priority Classification menu.
Four traffic queues are supported, which can be assigned priorities using the
Priority Mapping menu.
³ To select a traffic classification method:
1. Navigate to Main Menu > Configuration > Applications > QoS > Priority
Classification.
The Priority Classification menu appears as illustrated in
Figure 4-23 .
Note