Specifications
RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Operation 4-21
RICi-4E1/T1, RICi-8E1/T1
Configuration > Applications > Bridge > Bridge Port
1. Bridge port [1 – 6] (2)
2. Bind
3. Activation (Enable)
4. Ingress Filtering (Disable)
5. Copy Original Priority (Disable)
6. Default Priority Tag [0 - 7] …(4)
7. Egress Tag Handling (Stacking)
8. Ingress Tag Handling (Stripping)
9. TPID (Ether Type) [0 - ffff] (8100)
10. Save
f-Forward ; b-Backward; g-Go To ; d-Delete
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure
4-20. Bridge Ports Menu
Table
4-9. Bridge Port Parameters
Parameter Possible Values Remarks
Bridge Port
Number
1–6
Bridge port number.
Bridge port 1 is reserved for the host bridge port.
Press <F> to switch the port numbers.
Activation Enable (default)
Disable
Specifies if this port is active.
Port VID /
Stacking VID
1–4094
The default is 2
This is the PVID, the VLAN ID assigned to untagged frames or
priority-tagged frames received on this port. If stacking is enabled,
this is the tag to be added.
Copy Original
Priority
Enable
Disable
Enable: The priority tag of the original VLAN is copied if a frame
arrives with a stacked VLAN tag, otherwise the default priority is
used.
Disable: The default priority is used.
Default Priority
Tag
0–7
The default is 0
Default VLAN frame priority. Applies to untagged frames and when
per-port priority is used.
If stacking is enabled, this value is used for priority.
Egress Tag
Handling
Stacking
Stripping
None (default)
Stacking. adds the PVID to every frame transmitted from the port.
Stripping. removes the first VLAN tag from every transmitted frame,
on the egress of the port.
Ingress Tag
Handling
Stacking
Stripping
None (default)
Stacking. adds the PVID to every frame received on the ingress of the
port.
Stripping. removes the first VLAN tag from every received frame, on
the ingress of the port.
TPID (Ether
Type)
0 - 0xFFFF The associated Ethernet type (TPID) is used in all bridging, stacking
and stripping operations done on packets arriving or outgoing of this
port.