Specifications

Chapter 4 Configuration RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
4-8 Configuring for Management RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
2. Specify the following parameters according to Table 4-1 :
 Server Access. Enable or Disable
 Server IP Address. The Radius server’s IP address
 Key String. Shared secret
 Number of Retries and Timeout. Access-attempt parameters
 Authentication Port. Port used for authentication.
3. To switch to additional Radius servers, type f or b to navigate forward or
backward in the list of servers.
RICi-4E1/T1, RICi-8E1/T1
Configuration > System > Management > Management Access >
Radius Parameters
Server Sequence Number (1)
Server Status > (NOT_CONNECTED)
1. Server Access (Disable)
2. Server IP Address ... (0.0.0.0)
3. Key String ... ()
4. Number of Retries[0 - 10] ... (2)
5. Timeout (in seconds)[1 - 5] ... (2)
6. Authentication Port[1 - 65535] ... (1812)
Please select item <1 to 6>
F - Forward; B - Backward
ESC-prev.menu; !-main menu; &-exit
Figure 4-8. Radius Parameters Menu
Table
4-1. Radius Parameters
Parameter Possible Values Remarks
Server Sequence
Number
1–4
The default is 1
Sequential Radius server number
Server Status Connected
Not connected (default)
Disconnected
Radius server connection status
Server Access Disable (default)
Enable
Enable or disable access to the Radius server
Server IP Address 0.0.0.0 to 255.255.255.255
The default is 0.0.0.0
IP address of the Radius server
Key String User name (case sensitive) Shared secret between Radius server and user.
It is used for encryption
Number of Retries 1-10
The default is 2
Max. number of access attempts
Timeout 1-5
The default is 2
Number of seconds before access attempt fails
Authentication Port 1-65535
The default is 1812
Authentication protocol port