Specifications

Chapter 4 Configuration RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
4-6 Configuring for Management RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
³ To change the current user name and password:
1. Navigate to Main Menu > Configuration > System > Management >
Management Access > User Access.
The User Access menu appears as illustrated in
Figure 4-5 .
2. In the User Access menu, select User Name and enter a new user name,
which may consist of up to eight characters.
3. Select Old Password, and enter the current password. The default is 1234.
4. Select New Password and assign a new password, which may consist of up to
eight characters.
The password is case sensitive.
5. Select Confirm New Password to confirm the new password.
 If the new password is incorrect or the confirmed password does not
match the newly assigned one, an error returns. Reassign a new
password as explained above.
6. Select Save.
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Configuration > System > Management > Management Access > User
Access
User Level: (User)
1. User Name … (user)
2. Old Password … (********)
3. New Password … (********)
4. Confirm New Password … (********)
5. Save
Please select item from 1 to 5
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-5. User Access Menu
Configuring Network Managers
The network management stations to which the SNMP agent sends traps can be
defined or modified. Up to ten managers can be defined. Entering the IP address
and corresponding subnet mask defines each management station. In addition,
you can temporarily prevent a manager station from receiving traps by masking
the network manager.
³ To edit the manager list:
1. From the Management menu, select Manager List.
The Manager List menu appears as illustrated in
Figure 4-6 .
2. To add a new network manager, type a.
Note