Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Management 4-5
RICi-4E1/T1, RICi-8E1/T1
Configuration > System > Management > Management Access
1. User Access >
2. Radius Parameters >
3. Telnet/SSH Access (Enable)
4. SNMP Access (Enable)
5. WEB Access (Enable)
6. Access Policy >
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-4. Management Access Menu
³ To configure Telnet access:
• Select Telnet and then choose as follows:
 Enable – All users are enabled.
 Managers Only – Managers listed in the Managers list are enabled.
 Secure – Users using an SSH connection are enabled.
 Managers Only Secure – Managers listed in the Managers list using an SSH
connection are enabled.
 Disable – Telnet access is disabled.
³ To configure SNMP access:
• Select SNMP and then choose as follows:
 Enable – All users are enabled.
 Enable Managers Only – Managers listed in the Managers list are enabled.
 Disable – SNMP access is disabled.
³ To configure Web access:
• Select WEB and then choose as follows:
 Enable – All users are enabled.
 Enable Managers Only – Managers listed in the Managers list are enabled.
 Secure – Users using an SSL connection are enabled.
 Secure Managers Only – Managers listed in the Managers list using an SSL
connection are enabled.
 Disable – Web access is disabled.
Configuring User Access
The RICi-4E1/T1, RICi-8E1/T1 management platforms allow you to change current
user names and passwords. RICi-4E1/T1, RICi-8E1/T1 supports two user names
and passwords. The unit is shipped with the following default settings:
• User name – su, Password – 1234
• User name – user, Password – 1234.