Specifications

Chapter 4 Configuration RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
4-4 Configuring for Management RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
Entering Device Information
The management application associated with RICi-4E1/T1, RICi-8E1/T1 allows you
to assign a name for the unit, to specify its location and assign a contact person
to distinguish this unit from others installed in your system. You may enter up to
50 characters into every field.
³ To enter device information:
1. Navigate to Main Menu > Configuration > System > Management > Device
Info.
The Device Info menu appears. Refer to
Figure 4-3 for a typical screen.
The description for the unit is factory set.
2. Select Device Name and type a name for the unit. The default name is the
name of the unit: RICi-4E1, RICi-4T1, RICi-8E1, or RICi-8T1.
3. Select Location and type a description of the unit’s current location.
4. Select Contact Person and type the name of a contact person.
5. Select Save.
RICi-4E1
Main Menu > Configuration > System > Management > Device Information
Description (Fast Ethernet over 4 E1 Intelligent Converter)
1. Device Name ... (RICi-4E1)
2. Location ... (Location of the Device)
3. Contact Person ... (Name of the Contact Person)
4. Save
ESC-Previous menu; !-Main menu; &-Exit;
Figure 4-3. Typical Device Information Menu
Controlling Management Access
You can enable or disable access to the RICi-4E1/T1, RICi-8E1/T1 management
system via an SNMP, Telnet, or Web-based application. By disabling SNMP, Telnet,
or Web access, you prevent unauthorized access to the system. When SNMP,
Telnet, and Web access is disabled, RICi-4E1/T1, RICi-8E1/T1 can only be managed
using an ASCII terminal. In addition, you can limit access to the device to only the
stations defined in the manager list.
³ To define the management access method:
• Navigate to Main Menu > Configuration > System > Management >
Management Access.
The Management Access menu appears as illustrated in
Figure 4-4 .