Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Management 4-3
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Configuration > System > Management > Host IP >
Encapsulation
1. Host tagging (Tagged)
2. Host VLAN ID [1-4094] … (2)
3. Host Priority Tag [0-7] … (0)
4. Security Definitions (All)
5. Save
Please select item from 1 to 5
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-2. Encapsulation Menu
4. From the Encapsulation Menu, select Host Tagging to toggle between
Untagged or Tagged.
 Untagged. The host sends and receives frames with no VLAN tag to/from
the bridge.
 Tagged. The host receives frames only if they are tagged with the host’s
VLAN ID, and it sends frames to the bridge with this tag.
When Host Tagging is set to Tagged, two parameters are added to the menu,
Host VLAN ID and Host Priority Tag.
5. Select Host VLAN ID, and then specify the Host VLAN ID (1–4094).
6. Select Host Priority Tag to specify the priority level for the Host VLAN (0–7).
7. Select Security Definitions to specify the management access as follows:
 ALL. The unit can be managed from all ports
 OOB Only. The unit defines Fast Ethernet Port 4 as the OOB management
port. When this setting is specified, the device can only be managed
using the out-of-band option and from the associated port.
8. Select Save to save your changes.
9. Return to the Host IP menu and select Save to save your changes.
Note