Specifications

RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring for Management 4-1
Chapter 4
Configuration
This chapter illustrates the configuration screens and explains their parameters.
Examples are given from a terminal screen, but most of the menus are similar for
Telnet and Web terminal.
The menu tree of the management software is illustrated in Chapter 3.
4.1 Configuring for Management
The initial configuration of management parameters is performed via an ASCII
terminal. Once the RICi-4E1/T1, RICi-8E1/T1 host IP parameters are set, it is
possible to access them via Telnet or Web terminal to configure the units
for operation. Perform the following steps in order to configure the devices for
management:
³ To configure RICi-4E1/T1, RICi-8E1/T1 for first use:
• Configuring Host IP Parameters.
• Entering Device Information.
• Configuring Users and Management Access Permissions.
• Configuring Terminal Parameters.
Make sure that you save your settings at each configuration screen.
Note