Specifications
Chapter 2 Installation and Setup Installation and Operation Manual
2-2 Required Equipment RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
2.3 Package Contents
The package contains the following items:
• One RICi-4E1, RICi-4T1, RICi-8E1, or RICi-8T1 unit
• AC power cord or DC adaptor connector
• RM-35 kit for mounting in a 19” rack (if ordered)
• WM-35 kit for mounting a unit on a wall (if ordered).
2.4 Required Equipment
RICi-4E1/T1, RICi-8E1/T1 does not require special tools for installation. You only
need a screwdriver for mounting the unit in a 19-inch rack.
RICi-4E1/T1, RICi-8E1/T1 is equipped with the appropriate power cable for the
respective country or region. You connect the power socket on the rear panel to
the mains.
Refer to the following table to determine which cables and connectors are
required for installation.
Appendix A
specifies all connector pinouts.
Table
2-1. Required Connection Media
Interface Cable/Connector
Control port Straight RS-232/V.24 cable with DB-9 female
connector for ASCII terminal
Fast Ethernet interface RJ-45, 8-pin connection media
E1/T1 interface RJ-45, 8-pin connection media
For an unbalanced E1 interface, use the adapter cable
provided