Specifications

Chapter 1 Introduction Installation and Operation Manual
1-4 Overview RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
• RADview-Lite. RAD’s SNMP-based element management software, providing
SNMP traps, status polling, and configuration download. Remote element
management is available in RADview-Lite via Web-based application.
The following functionalities are available with the internal management
software:
• Viewing system information
• Modifying configuration and mode of operation, including setting system
default values and resetting the unit
• Monitoring performance
• Initiating connectivity tests
• Ping and Trace Route
• Remote software and configuration download/upload (TFTP)
• Upgrading software.
Security
The management applications are password protected.
RICi-4E1/T1, RICi-8E1/T1 supports the following access authorization levels:
• Super-user mode for configuration and monitoring
• User mode for monitoring and configuration view only.
You must re-enter the user name and the password if five minutes have elapsed
without entering at least one character.
The units support the following security protocols, providing a high level of client
server communication security.
• RADIUS authentication
• SSL for Web based management application
• SSH for Secure Shell communication session
Remote Monitoring with Syslog
RICi-4E1/T1, RICi-8E1/T1 uses the Syslog protocol to generate and transport
event notification messages over IP networks to up to five central Syslog servers.
The Syslog operation is compliant with RFC 3164.
Timing
RICi-4E1/T1, RICi-8E1/T1 has a single clock domain with master and fallback
sources for timing. The clock source can be the internal oscillator or loopback
timing (LBT) from an E1/T1 link.
Note