Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Quick Start Guide
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Configuring RICi-4E1/T1, RICi-8E1/T1 3
Configuring Ports at the Physical Level
You have to first configure the ports at the physical level.
³ To configure the Fast Ethernet ports:
1. From the Physical Ports menu (Main > Configuration > Physical Ports), go to
Activation and activate or deactivate the ports as needed.
2. Disable or enable Auto Negotiation, Flow Control and MDIX Auto Cross Over
as needed.
³ To configure E1/T1 ports:
1. From the Physical Port menu (Main > Configuration > Physical Port), choose
the port type.
2. Under Activation, activate or deactivate the port as needed.
3. Configure the required parameters associated with the relevant port.
Configuring the Bridge
The bridge parameters, as well as the bridge ports and the VLAN memberships,
must be configured according to your application requirements.
³ To configure the bridge:
• From the Bridge menu (Main > Configuration > Applications > Bridge),
configure the VLAN and filtering modes of the RICi-4E1/T1, RICi-8E1/T1
bridges.
³ To configure the bridge ports:
• From the Bridge Port menu (Configuration> Applications > Bridge > Bridge
Port), select a bridge port and configure the necessary parameters.
³ To configure the VLAN memberships:
• From the VLAN Membership menu (Configuration > Applications > Bridge >
VLAN Membership), create a new VLAN and define the egress tagged and
untagged ports which are the VLAN members.