Specifications

RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Installing RICi-4E1/T1, RICi-8E1/T1 1
Quick Start Guide
Your unit should only be installed by an experienced technician. If you are familiar
with RICi-4E1/T1, RICi-8E1/T1, use this guide to prepare the units for operation.
1. Installing RICi-4E1/T1, RICi-8E1/T1
Connecting the Interfaces
1. Connect the network to the RJ-45 connector designated E1 or T1.
 In case of fiber optical interfaces, first insert the SFP and then connect
the Ethernet equipment using a standard fiber optic cable terminated
with an LC connector.
2. Connect the user LAN to the RJ-45 connector designated 10/100 BaseT.
3. Connect a terminal to the front panel CONTROL connector
OR
Connect a Telnet host, a PC running a Web browsing application, or an SNMP
management station to the Ethernet port assigned to management.
Connecting the Power
• Connect the power cable to the power connector on the rear panel.
The unit has no power switch. It starts operating when the power
connector at the rear is connected to the mains.