Specifications

Chapter 6 Troubleshooting and Diagnostics RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
6-18 Testing the Unit RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Diagnostics > OAM Tests > Link Trace
1. Flow ID[1 - 8] ... (1)
Flow Name ... (Put your string here)
2. Destination Type (Target MAC Address)
3. Target MAC Address ... (00-00-00-00-00-00)
4. TTL[1 - 64] ... (64)
5. Send Link Trace
6. Results []
Please select item <1 to 4>
F-Forward; B-Backward
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-20. Link Trace Menu – Target MAC Address
Table
6-11. Link Trace Parameters – Target MAC Address
Parameter Possible Values Remarks
Flow ID 1 – 8 The ID of the virtual Ethernet connection.
Flow Name The name of the virtual Ethernet connection you chose.
Note: This parameter is read-only.
Destination Type Target MAC Address
Target MEP ID
The destination type for the link trace
Default: Target MAC Address
Target MAC
Address
The target MAC address of the link trace
TTL 1–64 This is used to limit the number of hops to 64. The first unit to
initiate the trace sets this to 64, then each unit in the trace
decrements it..
Default: 64
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Diagnostics > OAM Tests > Link Trace > Results
HOP MAC Address ING/EGR Action Port ID Relay Action
1 0020C0010203 IngOK MLPPP 1 RlyHit
1 0020C0010203 EgrOK MLPPP 1 RlyHit
2 0020C0010608 IngOK MLPPP 1 RlyHit
2 0020C0010608 EgrOK MLPPP 1 RlyHit
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-21. Link Trace Results
³ To trace OAM route according to the target MEP ID:
1. In the OAM Tests Link Trace menu, set Destination Type to Target MEP ID.
MEP parameters appear as illustrated in
Figure 6-22 .