Specifications

Chapter 6 Troubleshooting and Diagnostics RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
6-16 Testing the Unit RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
Parameter Possible Values Remarks
Result Parameters for Unicast MAC Address
Replys In-Order How many replies were received that were in order.
Replys Out-of-
Order
How many replies were received that were out of order.
Messages
Lost/Timed out
The number of messages that were lost or timed out
Messages
Lost/Timed out %
The percentage of messages that were lost or timed out
Result Parameters for Multicast MAC Address
Replied MEPs How many MEPs replied to loopback
MAC Address MAC address that sent reply to loopback
Known as Rem. Id Remote MEP ID that corresponds to the replying MAC address
³ To verify OAM connectivity according to the Remote MEP IDs:
1. In the OAM Tests Loopback menu, set Destination Type to Remote MEP ID.
Remote MEP parameters appear as illustrated in
Figure 6-19 .
If the number of loopbacks to send is 0, the Send Loopbacks parameter does not
appear in the screen.
2. Define the test parameters according to Table 6-10 .
3. Select Send Loopbacks to send the specified number of loopbacks.
The loopbacks are sent.
4. Select Results. The result parameters are described in
Table 6-9 .
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Diagnostics > OAM Tests > Loopback
1. Flow ID[1 - 8] ... (1)
Flow Name ... (No such flow)
2. Destination Type (Remote MEP ID)
3. Remote MEP ID[1 - 8191] ... (0)
Remote MEP Address ... (00-00-00-00-00-00)
4. Number of LBs to Send[0 - 50] ... (0)
5. Send Loopbacks
6. Results >
Please select item <1 to 4>
F-Forward; B-Backward
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-19. Loopback Menu – Remote MEP ID
Note