Specifications

Chapter 6 Troubleshooting and Diagnostics RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual
6-2 Monitoring Performance RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0
RICi-4E1
Main Menu>Monitoring>System>Interface Status
Description Type Activation Operation Speed
ETH 1 Fast Eth Up Up 100000000
ETH 2 Fast Eth Up Up 100000000
ETH 3 Fast Eth Up Up 100000000
ETH 4 Fast Eth Up Up 100000000
E1 PORT 1 BL E1 Up Up 2048000
LOGICAL PORT MLPPP MLPPP Port Up Up 16384000
LOGICAL PORT 1 Logical PPP Up Up 2048000
Bridge Port 6 Bridge Port Up Up 100000000
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure 6-1. Typical Interface Status Screen
Viewing Physical Layer Status
You can view the status of the unit’s physical ports.
For a description of the Ethernet and E1 port statistics, refer to
Viewing Interface
Statistics
.
Displaying Ethernet Port Status
³ To display the Ethernet port status:
• Navigate to Main Menu > Monitoring > Physical Port > Fast Ethernet > Status.
The Fast Ethernet Status screen appears as illustrated in
Figure 6-2 . It
includes the following:
 Activation. Indicates whether the interface is enabled or disabled
 Status. The link’s current data rate and duplex mode
 Flow Control – indicates whether Flow Control is enabled or disabled.
RICi-4E1/T1, RICi-8E1/T1
Main Menu>Monitoring>Physical Ports>Fast Ethernet>Status
Port (1)
Activation (Enable)
Status (Up)
Speed & Duplex (100Mbps - Full Duplex)
Flow Control (Enable)
ESC-Previous menu; !-Main menu; &-Exit
Figure 6-2. Ethernet Status Screen
Displaying Ethernet MAC Port Protection Status
³ To display the Ethernet MAC port protection status:
1. Navigate to Main Menu > Monitoring > Physical Port > Fast Ethernet >
MAC Access Control.