Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Additional Tasks 4-39
RICi-4E1/T1, RICi-8E1/T1
Main Menu > Utilities > File Transfer
1. Server IP Address (0.0.0.0)
2. Remote File Name ()
3. File Type (Configuration)
4. Command >
Please select item from 1 to 4
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Figure
4-40. TFTP Menu
2. In the File Transfer menu, select Server IP Address, and enter the TFTP
server’s IP address.
3. Select Remote File Name and enter a file name.
4. Select File Type and choose whether you intend to transfer a software
program (IMG) or a configuration file.
5. Select Save.
6. Select Command to start the desired procedure:
Upload – saving a software or configuration file on a remote server
Download – transferring a software or configuration file to the unit.
RICi-4E1/T1, RICi-8E1/T1 starts the file transfer.
The TFTP file transfer process is logged by the system messages listed below,
which are stored in the log file. For additional information, refer to
Chapter 6
.
TFTP – Starting Upload
TFTP – Starting Download
TFTP – Upload Failed
TFTP – Download Failed.
Resetting RICi-4E1/T1, RICi-8E1/T1
This section describes two types of reset functions:
Resetting configuration parameters to the default settings
Resetting the device to the factory settings.
Returning to Factory Defaults
You can reset the unit to its default settings.
³ To reset to the default settings:
1. Navigate to Main Menu > Configuration > System > Factory Defaults.
You are asked to confirm this request:
The device will restart with default configuration, proceed?
(Y/N)