Specifications

RICi-4E1/T1, RICi-8E1/T1 Installation and Operation Manual Chapter 4 Configuration
RICi-4E1/T1, RICi-8E1/T1 Ver. 2.0 Additional Tasks 4-37
Configuration>System>Syslog> Server Parameters
Server Sequence Number ... (1)
1. Server Access > (Disable)
2. Server IP Address ... (0.0.0.0)
3. UDP Port[1 – 65535] ... (514)
>
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-38. Syslog Server Parameters Menu
Table
4-20. Syslog Server Parameters
Parameter Possible Values Remarks
Server Sequence
Number
1–5 Shows which Syslog server is
being configured
Server Access Disable (default)
Enable
Controls the access to the Syslog
server
Server IP Address 0.0.0.0 –
255.255.255.255
IP address of the Syslog server
Server UDP Port 1–65535 UDP Port of the Syslog server
Viewing Inventory
The RICi-4E1/T1, RICi-8E1/T1 inventory displays information on current software
and hardware revisions of the unit. It also provides the
RICi-4E1/T1, RICi-8E1/T1 interface description.
³ To display the inventory:
• From the Main menu, select Inventory.
The Inventory table appears.
Figure 4-39 illustrates the first half of the
inventory table. Use the arrow keys to navigate through the table.
The inventory displays a description of the unit including its hardware revision
and the power supply type in use.
The inventory is a wide table with 132 characters. It is best viewed by setting
your terminal to 132 character wide display.
Note