Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Operation 4-37
³ To configure Layer 2 control protocol handling for user or network port:
1. From the Bridge Port menu, select L2CP Handling.
The L2CP Handling menu appears.
2. Select the item that you wish to change, and toggle between Tunnel and
Discard to specify how RICi-622GE processes layer 2 control protocol traffic:
 Tunnel – L2CP frames are forwarded across the network as ordinary data
 Discard – L2CP frames are discarded.
RICi-622GE
Configuration>Application>Bridge>Bridge Port> L2CP Handling
MAC Dest Address Handling
1. 01:80:C2:00:00:00 (Tunnel)
2. 01:80:C2:00:00:01 (Tunnel)
3. 01:80:C2:00:00:02 (Tunnel)
4. 01:80:C2:00:00:03 (Tunnel)
5. 01:80:C2:00:00:04 (Tunnel)
6. 01:80:C2:00:00:05 (Tunnel)
7. 01:80:C2:00:00:06 (Tunnel)
8. 01:80:C2:00:00:07 (Tunnel)
9. 01:80:C2:00:00:08 (Tunnel)
10. 01:80:C2:00:00:09 (Tunnel)
11. 01:80:C2:00:00:0A (Tunnel)
12. 01:80:C2:00:00:0B (Tunnel)
... (N)
>
Please select item <1 to 16>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 4-44. L2CP Handling Menu
³ To configure the bridge port egress bandwidth profile for user or network port:
1. From the Bridge Port menu, select Egress Bandwidth Profile.
The Egress Bandwidth Profile menu appears.
2. From the Egress Bandwidth Profile menu, configure the parameters as
detailed in
Table 4-11 .