Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Operation 4-35
RICi-622GE
Configuration>Application>Bridge>Bridge Port
Bridge Port > (VCG-1)
Flow Classification Mode (Flow-based)
1. Usage > > (Network)
2. Accept frame type (All)
3. Flow Key > > (SP-VLAN ID And 802.1p)
4. CoS Profile > > (DefaultCosPBits1)
5. Default VID [1-4094] ... (1)
6. Default 802.1p [0-7] ... (0)
7. SP Tag Protocol Identifier [0-FFFF] ... (8100)
8. Ingress MTU [64-9600] ... (2048)
9. L2CP Handling > >
10. Marking Profile > > (Marking1)
11. Egress Bandwidth profile >
12. Loop detection (Disable)
>
F - Forward ;
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 4-43. Bridge Network Port Configuration Menu
Table
4-10. Bridge Port Parameters
Parameter Description Values
Usage Defines if the port is network or user. Network
User
Flow Classification
Mode
Selects the flow classification mode. All-To-One – All ingress frames from the
specified port are assigned to one flow
Flow-Based – All ingress frames are
mapped to a flow according to the
configured flow key
Note: Flow classification mode must be
Flow-Based if the port is a Gigabit
Ethernet port being used to manage via
management VLAN.