Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Management 4-13
 To specify the transport endpoints from which an SNMP entity accepts
management requests
 To specify the transport endpoints to which a notification may be sent
using the community string matching the corresponding instance of
community name.)
RICi-622GE
Configuration>System>Management>SNMPv3 Settings>SNMPv1/v3 Mapping
1. Community Index ... ()
2. Community Name ... ()
3. Security Name ... ()
4. Transport Tag ... ()
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-15. SNMPv1/v3 Mapping Menu
Returning to SNMPv3 Factory Defaults
The SNMPv3 factory default option allows you to reset the SNMPv3 parameters to
factory default values.
³ To return to SNMPv3 factory default values:
1. From the SNMPv3 Settings menu (Configuration > System > Management >
SNMPv3 Settings), select SNMPv3 Factory Defaults.
A confirmation message appears.
THE SNMPV3 SETUPS WILL REINITIALIZE. DO YOU WANT TO PROCEED? (Y/N)
2. Type Y to confirm or N to cancel.
If you type Y, the device is reset to SNMPv3 factory default values.
Configuring RADIUS Client
The RADIUS (Remote Authentication Dial-In User Service) is a client/server
security protocol. Security information is stored in a central location, known as
the RADIUS server. RADIUS clients, such as RICi-622GE, communicate with the
RADIUS server to authenticate users. RICi-622GE supports up to four RADIUS
servers.
³ To configure the RADIUS client:
1. From the RADIUS Parameters menu (Configuration > System > Management >
Management Access > RADIUS Parameters), type f to select a RADIUS server
that you intend to configure.
The Server Status parameter indicates the current status of the selected
server. The status is one of the following:
 Connected – Selected server is currently operating as an active RADIUS
server