Specifications

Chapter 4 Configuration Installation and Operation Manual
4-10 Configuring RICi-622GE for Management RICi-622GE Ver. 1.0
RICi-622GE
Configuration>System>Management> SNMPv3 Settings> Targets & Notify
1. Target Params ...()
2. Target Address ...()
3. Notify ...()
4. Trap ...()
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-10. Targets & Notify Menu
RICi-622GE
Configuration>System>Management> SNMPv3 Settings> Targets and Notify > Notify
5. Name ...()
6. Type ...()
7. Tag ...()
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-11. Notify Menu
Assigning Traps
One or more traps must be assigned to each notification entry.
³ To assign traps to notification entries:
• From the Trap menu (Configuration > System > Management > SNMPv3
Settings > Targets & Notify >Trap), do the following:
 Select Notify Name and enter a tag from the list of previously defined
notification tags)
 Select Trap Name and enter a trap to be assigned to the selected tag.
RICi-622GE
Configuration>System>Management> SNMPv3 Settings> Targets and Notify > Trap
1. Notify Name >()
2. Trap Name >()
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-12. Trap Menu
Configuring Target Parameters
The SNMPv3 network management station to which RICi-622GE sends trap
notifications is referred to as a target. A set of parameters must be configured
and assigned to each target.