Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Management 4-9
 Select Authentication Protocol and define the authentication protocol to
be used for authenticating the user:
 usmNoAuthProtocol (No authentication is performed)
 usmHMACMD5AuthProtocol (MD5 protocol)
 usmHMACSHAAuthProtocol (SHA protocol).
 Select Privacy Protocol and define the type of privacy protocol to be used
for encryption:
 usmNoPrivProtocol (Privacy protocol is not used)
 usmDESPrivProtocol (DES protocol).
 Select Authentication Password and define the authentication password of
the user. This is not available if authentication has been disabled.
 Select Privacy Password and define the private key used for encryption.
This is not available if privacy has been disabled.
2. To view the summary of the SNMPv3 user configuration, select Summary User
Table from the SNMPv3 Settings menu (Configuration > System >
Management > SNMPv3 Settings).
³ To delete an SNMPv3 user:
1. From the Users menu (Configuration > System > Management > SNMPv3
Settings > Users), type f or b to select an SNMPv3 user.
2. Type r to delete the selected user.
Adding Notification Entries
³ To add a notification entry:
1. From the Targets and Notify menu (Configuration > System > Management >
SNMPv3 Settings > Targets & Notify), select Notify.
The Notify menu appears (see
Figure 4-11 ).
2. From the Notify menu, do the following:
 Select Name and enter an ASCII string identifying the notification entry
 Select Type and enter the type of notification entry
 Select Tag and enter a tag value to be associated with the notification
entry. This tag is used to identify the current notification entry when
configuring the target address.