Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Management 4-5
Controlling Management Access
You can enable or disable access to the RICi-622GE management system via SNMP,
Telnet, or Web-based application. If SNMP, Telnet, and Web access is disabled,
RICi-622GE can be managed only via an ASCII terminal. In addition, you can limit
access to RICi-622GE to only the stations defined in the manager list.
³ To define the management access method:
1. From the Management Access menu (Configuration > System > Management
> Management Access):
 Select Telnet/SSH Access to configure Telnet access
 Select SNMP to configure SNMP access
 Select Web to configure Web access.
2. Define the access mode for the selected management method:
 Enable – selected management method is enabled
 Disable – selected management method is disabled.
 Enable Secure (not relevant for SNMP):
 SSH-enabled secure access for Secure Shell is enabled if management
method is Telnet/SSH
 SSL-enabled secure access for Web is enabled if management method
is Web Access.
RICi-622GE
Configuration>System>Management>Management Access
1. User Access >
2. Telnet/SSH access > (Disable)
3. WEB > (Enable)
4. SNMP > (Enable)
5. Radius Authentication > (Enable Remote)
6. RADIUS Parameters >
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-6. Management Access Menu
Configuring User Access
RICi-622GE allows the definition of new users and their access levels. Only
superusers can define new users, while regular users can change their passwords.
³ To add a new user:
1. Make sure that you are logged in as su.
2. From the Management Access menu (Configuration > System > Management
> Management Access), select User Access.