Specifications

Chapter 4 Configuration Installation and Operation Manual
4-4 Configuring RICi-622GE for Management RICi-622GE Ver. 1.0
 Select Host Tagging, and choose Yes or No to consider or ignore the VLAN
tagging of the management traffic coming from the management station.
 If host tagging is enabled:
 Select Host VLAN ID and define the ID of the host VLAN (1–4094)
 Select Host Priority Tag and define the priority of the host VLAN (0–7).
 If host tagging is disabled:
 Select SP Management VLAN ID and define the VID for management
traffic towards the SP network (1–4094).
 Select SP Management Priority Tag and define the VLAN priority for
management traffic towards the SP network (0–7).
 Select Security Definition and define the network/user ports from which
the manager can access RICi-622GE. Possible values are:
 All – RICi-622GE can be accessed via any of its ports
 SDHSONET Only – RICi-622GE can be accessed via only SDH/SONET port
and Fast Ethernet management port
 GBE Only – RICi-622GE can be accessed via only Gigabit Ethernet port
and Fast Ethernet management port
 None – RICi-622GE can be accessed via only Fast Ethernet management
port.
RICi-622GE
Configuration>System>Management>Host>Encapsulation
1. Host Tagging (Yes)
2. Host VLAN ID [1 - 4094] ... (300)
3. Host Priority Tag [0 - 7] ... (7)
4. Security Definition > (All)
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-4. Encapsulation Menu, Host Tagging Enabled
RICi-622GE
Configuration>System>Management>Host>Encapsulation
1. Host Tagging (No)
2. SP Management VLAN ID [1 - 4094] ... (300)
3. SP Management Priority Tag [0 - 7] ... (7)
4. Security Definition ... (All)
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-5. Encapsulation Menu, Host Tagging Disabled