Specifications

Installation and Operation Manual Chapter 4 Configuration
RICi-622GE Ver. 1.0 Configuring RICi-622GE for Management 4-3
RICi-622GE
Configuration>System>Management>Host
1. IP address ... (0.0.0.0)
2. IP mask ... (0.0.0.0)
3. Default Gateway ... (0.0.0.0)
4. Encapsulation >
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 4-2. Host Menu, SNMPv3 enabled
Entering Device Information
The RICi-622GE management software allows you to assign a name to the unit,
specify its location to distinguish it from the other devices installed in your
system, and assign a contact person.
³ To enter device information:
1. From the Device Information menu (Configuration > System > Management >
Device Information), select Name and enter a name for the RICi-622GE unit.
2. Select Location and enter the name for the current RICi-622GE location.
3. Select Contact and enter the name of a contact person.
RICi-622GE
Configuration>System>Management>Device Information
Description ... RICi-622GE
1. Name ... (RICi-622GE)
2. Location ... (The Location of the Device)
3. Contact ... (Name of Contact Person)
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 4-3. Device Info Menu
Configuring Host Encapsulation
RICi-622GE management software allows you to create a dedicated management
VLAN in order to separate management traffic from the user data.
³ To configure the host encapsulation:
• From the Encapsulation menu (Configuration > System > Management> Host
> Encapsulation), do the following: