Specifications
Installation and Operation Manual Chapter 3 Operation
RICi-622GE Ver. 1.0 Configuration and Management Alternatives 3-9
Parameter Selection Screen
The current value of a parameter is listed within parentheses ( ).
³ To change a parameter value on a parameter selection screen:
• Type the line number corresponding to the desired value, and then press
<Enter>.
³ To enter a value that requires free text entry
• Type in the desired string and then press <Enter>. Use backspace to erase
the current string.
Note that when applicable, the allowed range of values of a parameter is
listed within square brackets [ ].
The entry is checked after pressing <Enter>, and it is accepted only if it is
valid:
If you make an error, for example, if you press a key not active on the current
screen or select an invalid parameter value, an ERROR indicator appears in the
right-hand corner. This indicator disappears as soon as you perform a correct
operation.
If you select a parameter value incompatible with the current operating state or
other parameters, a message is displayed that explains the error.
Terminal Hot Keys
The available hot keys are listed in the lower part of each screen. The following
hot keys are system keys available on menu screens:
• <Esc> – Return to previous menu
• <Tab> – select the next cell that may be changed
• A or a – Add item
• S or s – Save
• D or d – Delete, for example to delete an item from the Data Base
• ! – Return to the main menu
• & – Exit to password screen (to prevent unauthorized access after completing
the session)
• F or f – Forward interval (statistic menus)
• B or b – Backward interval (statistic menus).
When a menu is too long to fit on one screen, it is displayed on two consecutive
pages. In this case, you see …(N) after the last line on the first page and …(P)
after the last line on the second page.
³ To navigate between the pages:
• While on the first page, press N to display the second page
• While on the second page, press P to return to the first page.
When a configuration screen is organized as a table, a special set of keys is used
for navigation within the table (this type of screen always has a ? (help) option