Specifications

Chapter 3 Operation Installation and Operation Manual
3-8 Configuration and Management Alternatives RICi-622GE Ver. 1.0
Logging In
To prevent unauthorized modification of operating parameters, RICi-622GE
supports two access levels:
• Superuser can perform all the activities supported by the RICi-622GE
management facility, including defining new users.
• User’s access rights are defined by the superuser. Users are not allowed to
create new users.
It is recommended to change default passwords to prevent unauthorized access
to the unit.
³ To enter as a superuser:
1. Enter su for user name.
2. Enter 1234 for password.
This allows you to configure all the parameters of RICi-622GE, and to change the
su and user passwords.
³ To enter as a user:
1. Enter user for user name.
2. Enter 1234 for password.
Choosing Options
This section describes how to work with the menus provided by the RICi-622GE
management software.
³ To select a menu item:
• Type the corresponding line number and then press <Enter>.
One of the following occurs:
 A submenu or parameter selection screen is displayed
 You are enabled to type the (free text) parameter value in the same
row
 You are enabled to toggle the current value of the corresponding
parameter (relevant to ENABLE/DISABLE or ON/OFF selections).
• The response received after selecting a menu item is indicated as follows:
> Selecting that item displays a submenu or a parameter selection
screen.
... Selecting that item enables you to type the desired value in the
same line.
Nothing When neither symbol is displayed, selecting that item toggles
the current selection, now shown in brackets (for example, this
changes ENABLE to DISABLE or vice versa).
Note