Specifications

Chapter 3 Operation Installation and Operation Manual
3-6 Configuration and Management Alternatives RICi-622GE Ver. 1.0
Type Parameter Default Value
Tag Value 3 0
Tag Value 4 0
Tag Value 5 0
Tag Value 6 0
Tag Value 7 0
Marking Profiles Profile Name Marking1
CoS Value 0 0
CoS Value 1 0
CoS Value 2 0
CoS Value 3 0
CoS Value 0 for Yellow 0
CoS Value 1 for Yellow 0
CoS Value 2 for Yellow 0
CoS Value 3 for Yellow 0
Bandwidth Profiles Profile Name Profile1
CIR 1000000
CBS 2048
EIR 0
EBS 0
Policed Traffic All
Color Mode Blind
Coupling Flag Disable
3.4 Configuration and Management Alternatives
After installation, there are no special operating procedures for RICi-622GE. Once
it is powered up, the unit operates automatically. The unit operational status can
be monitored constantly.
If required, RICi-622GE can be reconfigured. RICi-622GE can be managed using
the following ports and applications:
• Local out-of-band management via the Fast Ethernet port or via an ASCII
terminal connected to the RS-232 port. Usually, preliminary configuration of
the system parameters is performed via ASCII terminal. Once the RICi-622GE
host IP parameters are set, it is possible to access it via Telnet, ConfiguRAD,
or RADview Lite for further configuration.