Specifications

Chapter 3 Operation Installation and Operation Manual
3-4 Default Settings RICi-622GE Ver. 1.0
Type Parameter Default Value
SDH/SONET Administrative Status Up
Block Rx Payload on TIM Disable
Logical Layer
VCG-1 Administrative status Up
VC Type SDH : VC-4
SONET: STS-3C
LCAS No
Number of VCs 4
Encapsulation GFP
VCAT Yes
FCS Yes
Payload Scrambling Yes
VCG-2 through VCG-8 Administrative status Down
VC Type Not defined
LCAS Not defined
Number of VCs Not defined
Encapsulation GFP
VCAT Yes
FCS Yes
Payload Scrambling Yes
Application
Bridge Port (ETH-1) Usage User
Accept Frame Type All
Flow Classification Mode All-to-One
CoS Profile DefaultCosPbits1
Default VID 1
Default 802.1p 0
Ingress MTU 2048
Loop detection Disable
Egress Bandwidth Profile Default bandwidth profile index (1)
Egress Rate Limit 1,000,000
Egress Burst Size 2048
Bridge Port (ETH-2) Usage User
Accept Frame Type All