Specifications

Chapter 1 Introduction Installation and Operation Manual
1-8 Technical Specifications RICi-622GE Ver. 1.0
Fault Propagation
Gigabit Ethernet link failure can be propagated over the SDH/SONET link on failure
of one or both links. Also, SDH/SONET link failure can be propagated over the
Gigabit Ethernet link. The user can configure the behavior of the fault
propagation mechanism per Gigabit Ethernet link or SDH/SONET link.
Figure 1-8
and
Figure 1-9 illustrate the fault propagation mechanism.
Figure 1-8. SDH/SONET to Gigabit Ethernet Fault Propagation
Figure 1-9. SDH/SONET to Gigabit Ethernet Fault Propagation
1.4 Technical Specifications
Gigabit
Ethernet
Interface
Number of Ports 2 (RJ-45 or fiber optic SFPs)
Fiber Optic
Specifications and
Ranges
See SFP Transceivers data sheet for specifications
Electrical Operation
Mode
10/100/1000BaseT, full or half duplex, autonegotiation
Connector Fiber optic: LC
1000BaseT: RJ-45
STM-4/OC-12
Interface
Number of Ports 2 (fiber optic SFPs)
Fiber Optic
Specifications and
Ranges
See SFP Transceivers data sheet for specifications
Connector LC