Specifications

Quick Start Guide Installation and Operation Manual

2 Configuring RICi-622GE RICi-622GE Ver. 1.0

4. Power up RICi-622GE. Verify that the POWER LED in back panel is On.

5. Wait until the RDY indicator is ON, and then press <Enter> once to obtain the

6. Enter your user name and password and proceed with the management

session.

The RICi-622GE default user name is su, default password is 1234.

Configuring RICi-622GE via the Quick Setup Menu

The management software provides a Quick Setup menu that includes the basic

parameters necessary for configuration.

³ To configure RICi-622GE:

1. From the Main Menu, select Main > Configuration > Quick Setup.

2. Configure the parameters according to the table below.

RICi-622GE

Configuration > Quick Setup

1. IP address ... (-)

2. IP mask ... (-)

3. Default Gateway ... (-)

4. Host Tagging > (Yes)

5. Host VLAN ID [1-4094] ... (1)

6. Host Priority Tag [0-7] ... (0)

ESC-prev. menu; !-main menu; &-exit; 1 M/ 2 C

RICi-622GE

Configuration > Quick Setup

1. IP address ... (-)

2. IP mask ... (-)

3. Default Gateway ... (-)

4. Host Tagging > (No)

5. SP Management VLAN ID [1-4094] ... (1)

6. SP Management Priority Tag [0-7] ... (0)

ESC-prev. menu; !-main menu; &-exit; 1 M/ 2 C

Note