Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
RICi-622GE Ver. 1.0 Technical Support 6-25
RICi-622GE
Diagnostics > Ping Test > Trace Route
1. Destination IP Address ... (0.0.0.0)
2. Display Trace Route
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 6-26. Trace Route Menu
RICi-622GE
Diagnostics > Ping Test > Trace Route
1. Destination IP Address ... (127.0.0.1)
2. Stop Trace Route
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
--------------------------------------------------------------
TRACERT – Tracing Route to 127.0.0.1
TRACERT – 1 192.188.171.1
TRACERT – 2 192.188.171.3
Figure 6-27. Trace Route Menu with Display
6.5 Frequently Asked Questions
Q: If I forget my password, what should I do?
A: Reset the device via the Boot Manager, and contact technical support.
Q: Does RICi-622GE have a mechanism to prevent overloading/discarding frames?
A: RICi-622GE prevents frame discard as much as possible by holding a frame
buffer at STM-4/OC-12 egress to absorb bursts. The buffer depth allows bursts at
a Gigabit Ethernet rate of about n frames, where n is the buffer depth (in
frames). The POS Tx default buffer depth is 1500 frames and can be configured
to hold up to 3000 frames. (Contact technical support if you need to change the
buffer depth.)
6.6 Technical Support
Technical support for this product can be obtained from the local distributor from
whom it was purchased.
For further information, please contact the RAD distributor
nearest you or one of
RAD's offices
worldwide. This information can be found at www.rad.com (offices
– About RAD > Worldwide Offices; distributors – Where to Buy > End Users).