Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-24 Testing RICi-622GE RICi-622GE Ver. 1.0
RICi-622GE
Diagnostics > Ping
1. Destination IP Address ... (0.0.0.0)
2. Number of Frames to Send [0 - 50] ... (4)
3. Send Ping
>
Please select item from 1 to 4
ESC-Previous menu; !-Main menu; &-Exit ?-Help
Figure 6-24. Ping Menu
RICi-622GE
Diagnostics > Ping Test > Ping
1. Destination IP Address ... (192.22.18.1)
2. Number of Frames to Send [0 - 50] ... (4)
3. Send Ping
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
---------------------------------------------------------------
PING – Frame no. 1: Ping Timeout
PING – Frame no. 2: Ping Timeout
PING – Frame no. 3 Reply Successful
PING – Frame no. 4 Reply Successful
PING – Sent 4, Received 2, Lost 2
Figure 6-25. Ping Menu, Pings Sent
Tracing the Route
This diagnostic utility traces the route through the network from RICi-622GE to
the destination host.
³ To trace a route:
1. In the Main menu, navigate to Diagnostics > Ping Test > Trace Route.
The Trace Route menu appears as illustrated in
Figure 6-26 .
2. In the Trace Route menu, select Destination IP Address and enter the IP
address of the host to which you intend to trace the route.
3. To start tracing, select Display Trace Route.
RICi-622GE starts tracing the route, displaying the IP addresses of all hop
nodes, and Stop Trace Route is displayed instead of Display Trace Route.
4. To stop the tracing, select Stop Trace Route.