Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
RICi-622GE Ver. 1.0 Handling Alarms and Traps 6-15
³ To clear the log file:
• From the Monitoring menu (Monitoring > System), select Clear Event Log.
The event log is cleared of all events.
Displaying Alarms
RICi-622GE allows you to display the active alarms or all alarms.
³ To display the active alarms:
• From the Monitoring menu (Monitoring > System), select Active Alarms.
The active alarms are displayed.
Table 6-6 describes the alarm
information.
RICi-622GE
Monitoring>System>Active Alarms
Code Port Description Severity State Count
14 LINK-1 SIGNAL LOSS Major On 1
50 ETH-02 LAN NOT CONNECTED Major On 1
64 VCG-1 GFP OUT OF SYNC Major On 1
>
ESC-prev.menu; !-main menu; &-exit ?-help 1 M/2 C
Figure 6-19. Active Alarms
³ To display all alarms:
• From the Monitoring menu (Monitoring > System), select All Alarms.
All alarms are displayed.
Table 6-6 describes the alarm information.