Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
RICi-622GE Ver. 1.0 Handling Alarms and Traps 6-13
Term Meaning
Receive Payload
Max length
violation
Number of frames received in the current interval with
payload fields exceeding the maximum allowed number of
bytes
Receive Payload
Min length violation
Number of frames received in the current interval with
payload fields less than the minimum allowed number of
bytes
FCS error Number of frames received in the current interval with
frame checksum errors
Receive tHEC multi
bit error
Number of frames received in the current interval with
multi-bit errors in the tHEC field of the header
Receive eHEC multi
bit error
Number of frames received in the current interval with
multi-bit errors in the eHEC field of the header
Receive PTI
mismatch
Number of frames received with a mismatch in the PTI field
(for example, PTI value doesn’t correspond to the Client
Data or Management frame)
Receive EXI
mismatch
Number of frames received with a mismatch in the EXI field
(for example, EXI value not equal to NULL or LINEAR
modes).
Receive UPI
mismatch
Number of frames received with a mismatch in the UPI field
(for example, EXI value not equal to 00000001).
Receive CID
mismatch
Number of frames received with a mismatch or
unsupported value in the CID field
6.2 Handling Alarms and Traps
RICi-622GE maintains a cyclic event log file that stores all the events recorded
during the past 24 hours, up to 256 events. All events are time-stamped.
Displaying Events
RICi-622GE allows you to display the event log.
³ To display the event log file:
• From the Monitoring menu (Monitoring > System), select Event Log.
The event log is displayed in the Event Log screen.