Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
RICi-622GE Ver. 1.0 Monitoring Performance 6-7
Ethernet port ( Figure 6-11 ). Table 6-2 describes the Ethernet statistic
counters.
2. Type f to advance to the Ethernet statistics screen for the next Gigabit
Ethernet port.
RICi-622GE
Monitoring>Physical Layer>Ethernet>Statistics
Port Label > (1)
Ethernet Port (ETH-1)
Counter --- RX --- --- TX ---
Total Frames (76856032) (30)
Total Octets (116667458094) (2673)
Correct Frames (76856033) (30)
FCS Errors (0) (0)
Jabber Errors (0) (0)
Fragments Errors (0) (0)
Undersized Frames (0) (0)
Oversized Frames (0) (0)
Collisions (0) (0)
Errors (0) (0)
Please select item 1
F-Forwards ; B-backwards
>
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 6-11. Ethernet Statistics Screen
Table
6-2. Ethernet Statistic Counters
Parameter Description
RX
Total Frames Total number of frames received
Total Octets Total number of octets received, including framing characters
Correct Frames Number of frames successfully received
FCS Errors Total number of frames received on a particular interface that are an integral
number of octets in length, but do not pass the FCS check. This count does not
include frames received with Frame-Too-Long or Frame-Too-Short error.
Jabber Errors Total number of long frames received with invalid CRC
Fragments Errors Total number of frames that are less than 64 octets in length (excluding framing
bits, but including FCS octets) and had either a bad Frame Check Sequence (FCS)
with an integral number of octets (FCS Error) or a bad FCS with a non-integral
number of octets (alignment error)
Undersized Frames Total number of received short frames with size under 64 bytes and with valid
CRC
Oversized Frames Total number of received long frames with size over 1518 bytes and with valid
CRC