Specifications

Installation and Operation Manual Chapter 6 Troubleshooting and Diagnostics
RICi-622GE Ver. 1.0 Monitoring Performance 6-3
RICi-622GE
Monitoring>Physical layer>SDH/SONET>Status>SFP
1. Port … > (Link-1)
Connector Type > (SFPIN)
Manufacturer Name > (FIBERXON INC.)
Typical Max. Range (km) > (0)
Wave Range > (1550 nm)
Fiber Type > > (MM)
TX Power (dBm) > (0)
RX Power (dBm) > (0)
Laser Bias (mA) > (0)
Laser Temperature(C) > (0)
Please select item <1 to 1>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 6-3. SDH/SONET SFP Status Screen
³ To display the SDH/SONET interface status:
1. From the Monitoring SDH/SONET menu (Main > Monitoring > Physical Layer >
SDH/SONET > Status), select Interface.
The SDH/SONET Interface status screen appears (see
Figure 6-4 ).
2. Type f to advance to the SDH/SONET Interface status screen for the next
port.
RICi-622GE
Monitoring>Physical layer>SDH/SONET>Status>Interface
1. Port > (Link-1)
Connector Type > (SFPIN)
Administrative Status > (Up)
Operation Status > (Up)
Please select item <1 to 1>
F-Forward
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 6-4. SDH/SONET Interface Status Screen
³ To display the SDH/SONET HVC status:
1. From the Monitoring SDH/SONET menu (Main > Monitoring > Physical Layer >
SDH/SONET > Status), select HVC.
The SDH/SONET HVC status screen appears (see
Figure 6-5 ).
2. Type f to advance to the SDH/SONET HVC status screen for the next port.