Specifications

Chapter 6 Troubleshooting and Diagnostics Installation and Operation Manual
6-2 Monitoring Performance RICi-622GE Ver. 1.0
RICi-622GE
Monitoring>Physical layer>Ethernet>Status>SFP
1. Port Number > (ETH-1)
Connector Type > (LC)
Manufacturer Name > (INFINEON)
Typical Max. Range > (15 km)
Wave Length > (1310nm)
Fiber Type … ... (SM)
TX Power (dBm) ... (0)
RX Power (dBm) ... (0)
Laser Bias (mA) ... (0)
Laser Temperature(C) ... (0)
Please select item 1
F-Forwards; B-Backwards
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 6-1. Ethernet SFP Status Screen
³ To display the Gigabit Ethernet port interface status:
1. From the Monitoring Gigabit Ethernet menu (Main > Monitoring > Physical
Layer > Ethernet > Status), select Interface.
The Ethernet Interface status screen appears (see
Figure 6-2 ).
2. Type f to advance to the Ethernet Interface status screen for the next port.
RICi-622GE
Monitoring>Physical layer>Ethernet>Status>Interface
1. Port > > (ETH-1)
Administrative Status > (Up)
Operation Status > (Up)
Auto Negotiation > (Completed)
Speed & Duplex > (1000Mbps Full Duplex)
Please select item 1
F-Forwards ; B-backwards
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 6-2. Ethernet Interface Status Screen
Displaying SDH/SONET Status
RICi-622GE allows you to view the status of the SDH/SONET ports at the physical
level. You can view the status of the SFP, interface, or HVC.
³ To display the SDH/SONET SFP status:
1. From the Monitoring SDH/SONET menu (Main > Monitoring > Physical Layer >
SDH/SONET > Status), select SFP.
The SDH/SONET SFP status screen appears (see
Figure 6-3 ).
2. Type f to advance to the SDH/SONET SFP status screen for the next port.