Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-20 Configuring a Traffic Aggregation Application RICi-622GE Ver. 1.0
5. Type % to update the database with your changes.
Configuring the Flows
You must configure a flow for each remote RICi-155GE unit, as shown in
Table 5-5 .
³ To configure the flows:
1. From the Flow menu (Configuration > Application > Flows), type a to add a
flow.
2. Enter flow ID 3.
3. Select Flow Name and assign a name to the flow (alphanumeric string of up
to 20 characters).
RICi-622GE
Configuration>Application>Flows
1. Flow ID[1 - 16] ... (3)
2. Flow Name ... (RICi-155GE A)
3. Bridge Port List >
>
Please select item <1 to 3>
A-Add New Flow; F-Forward ; B-Backward ; R-Remove
ESC-prev.menu; !-main menu; &-exit 1 M/2 C
Figure 5-33. Configuring Flow 1
4. Select Bridge Port List to display the Bridge Port List menu.
5. From the Bridge Port List menu, select LAG-1.