Specifications

Installation and Operation Manual Chapter 5 Configuring Typical Applications
RICi-622GE Ver. 1.0 Configuring a Traffic Aggregation Application 5-19
The VCG-2 mapping is added as shown below.
RICi-622GE
Configuration>Physical layer>SDH/SONET>Mapping>Link 1
STS1-1 STS1-2 STS1-3
STS3-1 [ VCG1 ]
STS3-2 [ VCG2 ]
STS3-3 [ VCG1 ]
STS3-4 [ VCG1 ]
1. None
2. VCG1
3. VCG2
4. VCG3
5. VCG4
>
%-Db Update; #-Undo
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-31. SONET Mapping
4. Perform the same procedure to map VCG-3 in the STS3-3 row, and VCG-4 in
the STS3-4 row. The completed mapping is shown below.
RICi-622GE
Configuration>Physical layer>SDH/SONET>Mapping>Link 1
STS1-1 STS1-2 STS1-3
STS3-1 [ VCG1 ]
STS3-2 [ VCG2 ]
STS3-3 [ VCG3 ]
STS3-4 [ VCG4 ]
1. None
2. VCG1
3. VCG2
4. VCG3
5. VCG4
>
%-Db Update; #-Undo
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-32. VCG SONET Mapping, Completed