Specifications

Chapter 5 Configuring Typical Applications Installation and Operation Manual
5-18 Configuring a Traffic Aggregation Application RICi-622GE Ver. 1.0
RICi-622GE
Configuration>Physical layer>SDH/SONET>Mapping>Link 1
STS1-1 STS1-2 STS1-3
STS3-1 [ VCG1 ]
STS3-2 [ VCG1 ]
STS3-3 [ VCG1 ]
STS3-4 [ VCG1 ]
1. None
2. VCG1
3. VCG2
4. VCG3
5. VCG4
>
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-29. Default SONET Mapping
2. Position the cursor over the VCG1 entry in the STS3-2 row, and type 1 and
then <Enter> to remove the VCG-1 mapping.
The VCG-1 mapping in the STS3-2 row is removed as shown below.
RICi-622GE
Configuration>Physical layer>SDH/SONET>Mapping>Link 1
STS1-1 STS1-2 STS1-3
STS3-1 [ VCG1 ]
STS3-2 None None None
STS3-3 [ VCG1 ]
STS3-4 [ VCG1 ]
1. None
2. VCG1
3. VCG2
4. VCG3
5. VCG4
>
%-Db Update; #-Undo
ESC-prev. menu; !-main menu; &-exit 1 M/2 C
Figure 5-30. SONET Mapping
3. Type 3 and then <Enter> to map VCG-2 in the STS3-2 row.